E-line eli-sip-nvr4-poe-d setup
![e-line eli-sip-nvr4-poe-d setup e-line eli-sip-nvr4-poe-d setup](https://data2.manualslib.com/first-image/i21/103/10254/1025359/eline-eli-sip-nvr4-poe.jpg)
This particular type of setting allows you to mask shadows or any other unnecessary objects that could possibly trigger false alarms. You can click on the reverse button to clear the entire area, then you can simply select different areas as you like. What this means is that the camera will have the schedule for motion alarm for a 24H period but motion recording will only occur when there is an object on from of the camera.Ĭlick on “motion area” to make sure the entire region is selected. These settings will allow you to have a period of 24H of motion recording. Select for the beginning time 00:00 and for the end time 24:00.
![e-line eli-sip-nvr4-poe-d setup e-line eli-sip-nvr4-poe-d setup](http://elinetechnology.com/wp-content/uploads/2016/05/figure-3-motion-300x171.jpg)
Most likely the camera will be already configured to record motion, but just to be sure I will check the settings as follows:Ĭlick on the tool range icon and select all to get the days of the week selected. Our next setting to be configured is the Motion Alarm on the camera. I like to identify my cameras based on location so they are easy to manage when pulling footage.
![e-line eli-sip-nvr4-poe-d setup e-line eli-sip-nvr4-poe-d setup](https://elinetechnology.com/wp-content/uploads/2016/05/figure1-w-3.jpg)
This is not required but is just a personal preference. Save these settings and reboot the NVR.Īnother setting I would change is the channel name. We need to make sure that after the GMT & DST has been set on both devices, the time needs to be changed manually to your current time. Also, make sure that DST is set to “ON” on both the camera and NVR and the NTP is OFF. In order to have the time in sync with the NVR, the GMT for both the camera and the NVR needs to be set to (GMT+08:00). Some cameras can be set to use a higher amount of bandwidth when there is a lot of motion happening, as an example.Īnother thing to configure in these cameras is the Time. IP cameras can definitely make your network unstable if these devices are not set correctly. The key to having your network stability good at all times is to a consistent bandwidth throughout your devices. In this kind of setup, it is very important to be consistent. Below is a screenshot of what I recommend these cameras to be set at:
![e-line eli-sip-nvr4-poe-d setup e-line eli-sip-nvr4-poe-d setup](https://www.securitycameraking.com/securityinfo/wp-content/uploads/2015/09/network.jpg)
We will need to change the encoding, FPS (Frames per Second), bit rate and bit rate type. The next option will be to access the cameras web interface and change some settings. Once the camera appears in the tool, select the device ID, “Device obtain an IP address automatically” and click modify.
#E line eli sip nvr4 poe d setup install
It is recommended that you install all the necessary tools to find the cameras on the network once they are connected.Īfter one of the cameras is connected to the switch, open the search tool and select the option labeled “Device obtain an IP address automatically” option to make the camera get an IP address from the DHCP server of the router. Lets start by connecting the cameras on a POE switch on your network.
#E line eli sip nvr4 poe d setup how to
I will demonstrate how to find the camera on the network, basic IP configuration to use with the POE NVR, and some of the settings you will need to set to record motion. Today I will explain how to use the ELI-SIP-EMVD-21-4R ONVIF IP Dome Security Camera with an NVR-ELT4-POE4. ONVIF cameras are getting very popular and more of these type of cameras are able to integrate almost 100% with our NVRs.